Introduction of C-type hydraulic press

C-type press is also called bow press and single-arm hydraulic press, because its appearance resembles C and bow. The main features of C-type press are convenient loading and unloading, simple structure, simple operation and wide application. C-type press is mainly divided into pneumatic, hydraulic and mechanical transmission.The working principle of single-arm hydraulic press is mainly concentrated on the hydraulic system. The hydraulic system includes power system, control system and working system. The power system is mainly composed of oil tank, oil pump, motor, etc., which provides the power source of hydraulic oil. The control system is composed of oil circuit solenoid valve, etc., which is used to control and adjust the oil pressure. The working system includes hydraulic cylinder and pressure head to realize force transmission and processing operation.The main body, slider and workbench are important components of hydraulic press. The hydraulic cylinder is installed in the hole of the main body drag steel plate. The slider is connected to the piston rod connection flange of the main cylinder. The guide column guides the up and down reciprocating motion. The lower part of the main body is installed with a workbench plate. The surface of the slider and the workbench is grooved, which is convenient for users to fasten and install the mold.

The single-arm hydraulic press is a multifunctional small and medium-sized hydraulic press, which is suitable for the correction of shaft parts and profiles and the pressing of shaft sleeve parts. It can also complete the bending, stamping, sleeve and stretching of sheet parts, and can also be used for pressing powder and plastic products with less stringent requirements.

1. The main frame of the machine is welded by steel, the surface is painted, and the surface of the pillar is chrome-plated to ensure that the machine is rust-free and durable. 2. The hydraulic station is placed at the bottom of the machine and connected to the machine. The valve seat and the oil cylinder are connected by a high-pressure oil pipe, which reduces the equipment footprint and is easy to move. 3. The lower part of the machine is equipped with a shockproof fixed machine foot, which is convenient for movement and matching with other units or production lines. 4. An infrared hand guard is installed in front of the machine to protect the hands from being pressed during the stamping process of the machine, and the safety factor is higher. 5. There is a blanking hole on the working surface of the machine, a funnel on the left, and an air blowing device to facilitate the collection of waste. 6. The machine's holding time and stroke can be manually adjusted according to actual needs.