What are the requirements for the correct operation of a low pressure casting machine?

2025,01,05

Safety protection requirements for low pressure casting machines:

　1. The mold closing module and insert module of the equipment are hydraulically driven. After clamping the mold insert, the castings should be reliably locked. The mold clamping switch only serves as a signal prompt. The pressure of the hydraulic system should always act on the casting until the casting is completely formed and solidified. A corresponding display device should be installed on the operating table;

　2. The main dangerous area of the low-pressure Casting Machine belongs to the mold module, and corresponding measures should be taken to eliminate it;

3. In any case, the mold closing must be interlocked with the pouring, which can effectively avoid the pouring action when the mold closing is not in place;

　4. The mold matching module of the equipment should accurately know the accuracy of the mold matching, and can be equipped with a displacement sensor to provide prompts, effectively preventing raw materials from overflowing or splashing from the parting surface during pouring;

　5. When pouring or solidifying the raw material liquid, the casting machine should ensure that all other control actions are in an interlocked state;

　6. From the overall design point of view, it is necessary to ensure that the casting mold can be firmly installed on the moving and fixed seat plates to avoid accidental loosening and danger to the operator.

　7. The rising tube, transition sleeve and gate of the holding furnace should be sealed and tightened, and pouring can only be done after the holding furnace is in the correct working position;

8. The number of controllers of the equipment should be consistent with the number of staff specified on the switch;

Dongguan Shengshi Weiye Machinery Technology Co., Ltd. specializes in the production of Gravity Casting Machine,Low Pressure Casting Machine,Liquid Die Forging Machine and other machines. Friends in need are welcome to pay attention and learn more.

Author:

Ms. Hu

E-mail:

dgliheng168@163.com

Phone/WhatsApp:

+86 13509684273